Ecliptech Shift P2 with steering wheel mount fixture.

I made the steering wheel mount to locate between the wheel and the hub, so that the unit sits just over the top of the wheel, the carbon plate is machined to fit the stock wheel mounting holes of 5mm on 70mm P.C.D.

It looks excellent when fitted, far better than the intended  posn. where you're supposed to be using your peripheral vision, and you can just glance down, rather than having to look away from the road ahead!

The unit is new and unused, apart from being connected to test functions, I was intending to only use it as a shift light, hence you'll see the plug & socket I have it wired to only having 3 pins, however I've included a 6 pin plug & socket so that the additional functions of the unit can be utilised if so desired.

My reason for selling it is that I've now replaced my original Stack Unit (also for sale here) with a digital dash unit that has a shift light incorporated.<…

The ultimate road and track car.

First registered in 2017 and supplied to an independent dealer I purchased the car in December 2018 with delivery miles  Although used as intended on tracks across the UK and Europe it hasn’t been trailered hence the vast majority of miles have been on the road.  I’ve driven it multiple times from the north of Scotland to Zandvoort, Spa, Nürburgring and the south of France including a week touring in the Alps.

Full Service History from Lotus specialist Craig Moncrieff.

The tonneau cover provides added protection and there is ample luggage space in the passenger area.  A Lotus overnight rain cover and battery charger is included.  The car could easily be converted to 2 seats if required with a new windscreen panel and additional seat.

I don’t think there is a better car for road and track at this price point.

ENGINE:

410bhp, 3.5 litre V6, 24 valve, water cooled, all aluminium engine.  Edelbrock superch…

Transform the gearchange on your k series Elise s1 and s2 with these precision made nylatron gear linkage bushes.

These replace your worn rubber bushes on the cable ends of the gear linkage and the plastic bushes on the bell crank pivot.

When fitted these will give a much more positive feel to the gear change

Easy DIY fitting guide included

£17.95 posted

Silver filler cap surround, which I replaced with a black one not long after I bought my car in 2014 (although car is an '02) really good condition, no corrosion or scratches, anodizing not faded. Less than half price of a new one from Lotus!

Delivery is for U/K only as it ends up being a lot of hassle otherwise!

Revotec adjustable rad. fan controller, temp. range 70 to 120 deg. complete with silicon top hose, stainless hose clips and E.P. fitting instructions.

I bought this for my S2 K Series as I wanted the fan to cut in before the temp got to 105 deg. which I considered to be on the high side. It was installed in a new rad hose on the offside of the car, which I've included with it, although it will fit any 32mm hose in a different place if preferred.

I ran it on the car for a few months prior to installing a Davies Craig E.W.P. it's in perfect working condition, unearthed recently during workshop tidying, at which point I discovered the relay mounting 'tag' had cracked, so I've repaired it as you'll see in the pic. with an ally. one.

This will fit the S1 and S2 Elise and Exige, and the 340R Delivery applies to U/K only as it's become too much hassle sending stuff abroad now!

K Series S2 original lower engine mount, good condition, rubber bush okay not perished, replaced with adjustable one when I bought my car in 2014.

Delivery applies to U/K only.

CNC machined solid ally stalks for Elise Exige S1 S2 S3

(see attached image of the OEM stalks these will replace )

fitting instruction included

Available in a range of finish options:

A Satin black with brushed tips

B Satin black

C Brushed ally

D High polished

NOTE will not fit anything with cruise control Price includes UK postage happy to post world wide at cost

The cable in my hood has snapped but I can do with a hood that works. Don't know what the price should be.

Engine hatch cover from my 2002 Elise, was originally black when new, but subsequently resprayed blue 6 months before I bought the car in 2014, the orange centre band and black pin stripes are wraps, so could be removed with careful use of a heat gun or very hot hairdryer. I've included a couple of pics of my car just back from the graphics guys, if you zoom in you can see there's no damage to the paint underneath.

It's in perfect condition with no damage to the plastic louvres either.

Reason for sale is that I've replaced it with a carbon fibre one, all part of my cars extensive rebuild!

I'll accept a sensible offer, but I won't give it away!

Ideally needs collecting due to its size and fragility, but I could try and arrange a courier if needs be. U/K delivery only.

Exige hatch prop strut, as new unfitted, unused. This is from the firm 'Really Light Stuff' in the 'States, i bought it from a guy on here who'd bought it and paid £125 for it with import charges on top, but by the time he'd got it he'd decided to sell his car. I bought it for my Elise, as my original one was bent and i couldn't straighten it nicely enough for my liking! However it won't work for an Elise engine hatch as it's too short!

It's a 10mm dia. rod with 500mm centres to the 10mm dia. holes each end, also included with it are 2 plastic clips with double sided tape backing.