Do you have an Exige V6 CUP or 430 CUP or maybe an Elise 250 CUP. This registration number is for you. The registration is on a retention certificate and ready for transfer. The £80 transfer fee is included.

Elise S2 onwards door waist seal, Lotus part no. B1117U0009F  I bought this earlier this week from 'VirgilTracey' who had advertised it here for 'offers' and I paid him £125 for it, intending to fit it when I installed the pair of lightweight polycarb windows that I've just ordered, but because these are fixed solid,with sliding vents, I'm making some brkts. to secure them and the inner part of the  seal will not fit with them, so I'm going to use a different seal arrangement.

Hence reason for selling, the seal has never been fitted, and in overall very good condition, however there is a small amount of corrosion at one end with another 2 small bumps evident, due to damp when in storage, poor manufacturing quality I guess, but it's in far better condition than those on older cars out there.

I've tried to show the faults as best as i can in the pics.

The price from DeRoure for a new seal is £328 + carriage!

Pair of satin black window winders, very recently bought from Elise Parts, only trial fitted to my car.

They are really well made, with nicely rounded corners, far better than the stock Lotus ones!

The reason why I'm selling them is that I'm about to fit some polycarbonate windows which are fixed rigid in the doors, with sliding vents to let the air in, so I no longer need a winding handle!

Along with them I'll include 8 off titanium screws in rainbow colour, which I bought to replace the stock stainless ones they come fitted with, which were £4.68 each

They will fit all models S1/S2/S3 Elise & Exige, 2-11, also the Europa, & VX220

The ultimate road and track car.

First registered in 2017 and supplied to an independent dealer I purchased the car in December 2018 with delivery miles  Although used as intended on tracks across the UK and Europe it hasn’t been trailered hence the vast majority of miles have been on the road.  I’ve driven it multiple times from the north of Scotland to Zandvoort, Spa, Nürburgring and the south of France including a week touring in the Alps.

Full Service History from Lotus specialist Craig Moncrieff.

The tonneau cover provides added protection and there is ample luggage space in the passenger area.  A Lotus overnight rain cover and battery charger is included.  The car could easily be converted to 2 seats if required with a new windscreen panel and additional seat.

I don’t think there is a better car for road and track at this price point.

ENGINE:

410bhp, 3.5 litre V6, 24 valve, water cooled, all aluminium engine.  Edelbrock superch…

Revotec adjustable rad. fan controller, temp. range 70 to 120 deg. complete with silicon top hose, stainless hose clips and E.P. fitting instructions.

I bought this for my S2 K Series as I wanted the fan to cut in before the temp got to 105 deg. which I considered to be on the high side. It was installed in a new rad hose on the offside of the car, which I've included with it, although it will fit any 32mm hose in a different place if preferred.

I ran it on the car for a few months prior to installing a Davies Craig E.W.P. it's in perfect working condition, unearthed recently during workshop tidying, at which point I discovered the relay mounting 'tag' had cracked, so I've repaired it as you'll see in the pic. with an ally. one.

This will fit the S1 and S2 Elise and Exige, and the 340R Delivery applies to U/K only as it's become too much hassle sending stuff abroad now!

A pair of S1 headlights in good condition for 25 years old ,plus postage

Engine hatch cover from my 2002 Elise, was originally black when new, but subsequently resprayed blue 6 months before I bought the car in 2014, the orange centre band and black pin stripes are wraps, so could be removed with careful use of a heat gun or very hot hairdryer. I've included a couple of pics of my car just back from the graphics guys, if you zoom in you can see there's no damage to the paint underneath.

It's in perfect condition with no damage to the plastic louvres either.

Reason for sale is that I've replaced it with a carbon fibre one, all part of my cars extensive rebuild!

I'll accept a sensible offer, but I won't give it away!

Ideally needs collecting due to its size and fragility, but I could try and arrange a courier if needs be. U/K delivery only.

CNC machined solid ally stalks for Elise Exige S1 S2 S3

(see attached image of the OEM stalks these will replace )

fitting instruction included

Available in a range of finish options:

A Satin black with brushed tips

B Satin black

C Brushed ally

D High polished

NOTE will not fit anything with cruise control Price includes UK postage happy to post world wide at cost

Lotus rear badge letters, not genuine, very close to original size at 17mm high, although slightly different shape, new still in sealed bags.

I bought them from someone on the forum a while ago, in case I needed to replace the set I had on my car when it was having its wrap redone recently.

I'd bought a set for my car back in 2014 as the original letters hadn't been replaced when it had been wrapped with the 'Gulf' orange and black pinstripes over its fresh blue paint.

At the time I paid more than enough for them; but as it turned out the graphics guys redoing my car are perfectionists, using lazers to get everything perfectly in line, and they cleaned my original T and refitted without any hassle.

Transform the gearchange on your k series Elise s1 and s2 with these precision made nylatron gear linkage bushes.

These replace your worn rubber bushes on the cable ends of the gear linkage and the plastic bushes on the bell crank pivot.

When fitted these will give a much more positive feel to the gear change

Easy DIY fitting guide included

£17.95 posted