Do you have an Exige V6 CUP or 430 CUP or maybe an Elise 250 CUP. This registration number is for you. The registration is on a retention certificate and ready for transfer. The £80 transfer fee is included.
Featured Listings
Check out our featured listings
Elise S2 Filler Cap Surround
Silver filler cap surround, which I replaced with a black one not long after I bought my car in 2014 (although car is an '02) really good condition, no corrosion or scratches, anodizing not faded. Less than half price of a new one from Lotus!
Delivery is for U/K only as it ends up being a lot of hassle otherwise!
Elise door waist seal
Elise S2 onwards door waist seal, Lotus part no. B1117U0009F I bought this earlier this week from 'VirgilTracey' who had advertised it here for 'offers' and I paid him £125 for it, intending to fit it when I installed the pair of lightweight polycarb windows that I've just ordered, but because these are fixed solid,with sliding vents, I'm making some brkts. to secure them and the inner part of the seal will not fit with them, so I'm going to use a different seal arrangement.
Hence reason for selling, the seal has never been fitted, and in overall very good condition, however there is a small amount of corrosion at one end with another 2 small bumps evident, due to damp when in storage, poor manufacturing quality I guess, but it's in far better condition than those on older cars out there.
I've tried to show the faults as best as i can in the pics.
The price from DeRoure for a new seal is £328 + carriage!
Satin Black Window Winders
Pair of satin black window winders, very recently bought from Elise Parts, only trial fitted to my car.
They are really well made, with nicely rounded corners, far better than the stock Lotus ones!
The reason why I'm selling them is that I'm about to fit some polycarbonate windows which are fixed rigid in the doors, with sliding vents to let the air in, so I no longer need a winding handle!
Along with them I'll include 8 off titanium screws in rainbow colour, which I bought to replace the stock stainless ones they come fitted with (pic to follow) I've also got a set of black titanium screws as an alternative set if you prefer. The titanium screws cost £4.68 each so I won't let both sets go with them!
They will fit all models S1/S2/S3 Elise & Exige, 2-11, also the Europa, & VX220
Lift/Jack Support Pucks
Once fitted, these allow use of lift point C for jacking or supporting the car without having to remove the undertray; and if used with a 2 post lift, prevent any chance of the car toppling over backwards when removing the front wheels having used lift point A instead.
They are the correct size to match the crossmember, anything larger resulting in them not being flush with the sides of the chassis, as it tapers forward from the mounting point.
To fit them you simply remove the undertray, undo the outer crossmember bolt nearest the sill, and fit in place using the supplied replacement longer bolt, with the 'larger' side of the puck pointing inwards towards the centre of the car, so that the support is between the bolts.
They will fit all models/variants of the S1, S2 & S3 Elise/Exige also the VX220 & Europa.
Now includes a pair of good quality 'Jack Point' stickers for marking the undertray, courtesy of 'Divine Handcraft'
I've gene…
Elise Shower Cap
Elise S2/S3, (poss. fit others?) shower cap, bought several years ago and only used a couple of times, as I had a really heavy duty one I used to keep at work for when I parked it up there.
Velcro straps secure front end around mirrors, with plastic clips to engage in rear roof location points.
Stored this in the boot to take to race meetings and shows, but only needed occasional use, no rips or tares and not affected by U/V from sunshine!
Nice waterproof canvas backed material, only taken out of bag since I last used it, for pics today.
Hangar 111 Tailbox
Hangar 111 'Signature' Exhaust Tailbox, I bought this from someone on the forum who'd had it on his car for a fortnight, then since removed it, as he lived in a quiet cul-de-sac and had received various complaints from long standing neighbours about how loud it was first thing in the morning, and had swapped back to his original to keep the peace!
I bought it and fitted it in place of the Larini exhaust that my car came with, as part of the upgrade when my car was being rebuilt earlier this year, along with a 4 branch downpipe and sports cat, however, when the cars' new engine was being tested on the Dyno, back in November 2013, I was told that it was restricting max power by quite a lot, so I've now replaced it with one of Elise Parts big bore tailboxes., which are 2 1/2'' bore as opposed to this being 1 3/4''
It's in near perfect condition having only been on my car during 'running in' the new engine on the dyno, with no road use at all, apart from the couple…
ALLOY INDICATOR/ WIPER STALKS ELISE EXIGE S1 S2 S3
CNC machined solid ally stalks for Elise Exige S1 S2 S3
(see attached image of the OEM stalks these will replace )
fitting instruction included
Available in a range of finish options:
A Satin black with brushed tips
B Satin black
C Brushed ally
D High polished
NOTE will not fit anything with cruise control Price includes UK postage happy to post world wide at cost
Elise S2 Engine Hatch
Engine hatch cover from my 2002 Elise, was originally black when new, but subsequently resprayed blue 6 months before I bought the car in 2014, the orange centre band and black pin stripes are wraps, so could be removed with careful use of a heat gun or very hot hairdryer. I've included a couple of pics of my car just back from the graphics guys, if you zoom in you can see there's no damage to the paint underneath.
It's in perfect condition with no damage to the plastic louvres either.
Reason for sale is that I've replaced it with a carbon fibre one, all part of my cars extensive rebuild!
I'll accept a sensible offer, but I won't give it away!
Ideally needs collecting due to its size and fragility, but I could try and arrange a courier if needs be. U/K delivery only.
Revotec Rad. Fan Controller
Revotec adjustable rad. fan controller, temp. range 70 to 120 deg. complete with silicon top hose, stainless hose clips and E.P. fitting instructions.
I bought this for my S2 K Series as I wanted the fan to cut in before the temp got to 105 deg. which I considered to be on the high side. It was installed in a new rad hose on the offside of the car, which I've included with it, although it will fit any 32mm hose in a different place if preferred.
I ran it on the car for a few months prior to installing a Davies Craig E.W.P. it's in perfect working condition, unearthed recently during workshop tidying, at which point I discovered the relay mounting 'tag' had cracked, so I've repaired it as you'll see in the pic. with an ally. one.
This will fit the S1 and S2 Elise and Exige, and the 340R Delivery applies to U/K only as it's become too much hassle sending stuff abroad now!