A change of plans means I have these Exige lightweight size twin spoke forged wheels (the slightly wider fronts that really suit Elise too). S2 of course. They are as new and only test fitted with unused Rainsport tyres currently fitted. I was going to use these as spares for wet days! Included is s barely used set of Toyo R888R (just one day of hillclimb at Prescott). These are the 205-45-16 fronts which work particularly well on these rims and were purchased in April last year so are lovely and soft.. Id prefer to sell as s complete package but could be persuaded to split. The two sets of tyres would be well over 1k so grab a bargain.
Featured Listings
Check out our featured listings
Elise S2 Filler Cap Surround
Silver filler cap surround, which I replaced with a black one not long after I bought my car in 2014 (although car is an '02) really good condition, no corrosion or scratches, anodizing not faded. Less than half price of a new one from Lotus!
Delivery is for U/K only as it ends up being a lot of hassle otherwise!
K Series S2 lower engine mount
K Series S2 original lower engine mount, good condition, rubber bush okay not perished, replaced with adjustable one when I bought my car in 2014.
Delivery applies to U/K only.
Lift/Jack Support Pucks
Once fitted, these allow use of lift point C for jacking or supporting the car without having to remove the undertray; and if used with a 2 post lift, prevent any chance of the car toppling over backwards when removing the front wheels having used lift point A instead.
They are the correct size to match the crossmember, anything larger resulting in them not being flush with the sides of the chassis, as it tapers forward from the mounting point.
To fit them you simply remove the undertray, undo the outer crossmember bolt nearest the sill, and fit in place using the supplied replacement longer bolt, with the 'larger' side of the puck pointing inwards towards the centre of the car, so that the support is between the bolts.
They will fit all models/variants of the S1, S2 & S3 Elise/Exige also the VX220 & Europa.
Now includes a pair of good quality 'Jack Point' stickers for marking the undertray, courtesy of 'Divine Handcraft'
I've gene…
Lotus Elise S3 1.6 Touring, 2010, Yellow, 41k miles, 4 previous owners.
Full black leather interior trim with yellow detail stitching, Probax seats.
Extra equipment includes, hard and soft tops, Bilstein Sport suspension, 2Bular Stainless exhaust system (4 branch manifold, cat and silencer), K&N air filter.
The car is in great condition inside and out and benefits from a recent Alloy radiator (Seriously Lotus) replacement.
This has been my second Elise and much preferred to my S2. I'm now in my 70's and have totally enjoyed my last 4 1/2 years of ownership but have now decided that it's perhaps time for someone else to put a few more miles on the clock!
Any questions, more than happy to chat.
Elise S2 Engine Hatch
Engine hatch cover from my 2002 Elise, was originally black when new, but subsequently resprayed blue 6 months before I bought the car in 2014, the orange centre band and black pin stripes are wraps, so could be removed with careful use of a heat gun or very hot hairdryer. I've included a couple of pics of my car just back from the graphics guys, if you zoom in you can see there's no damage to the paint underneath.
It's in perfect condition with no damage to the plastic louvres either.
Reason for sale is that I've replaced it with a carbon fibre one, all part of my cars extensive rebuild!
I'll accept a sensible offer, but I won't give it away!
Ideally needs collecting due to its size and fragility, but I could try and arrange a courier if needs be. U/K delivery only.
E2 CUP Personalised Registration For Sale
Do you have an Exige V6 CUP or 430 CUP or maybe an Elise 250 CUP. This registration number is for you. The registration is on a retention certificate and ready for transfer. The £80 transfer fee is included.
Elise door waist seal
Elise S2 onwards door waist seal, Lotus part no. B1117U0009F I bought this earlier this week from 'VirgilTracey' who had advertised it here for 'offers' and I paid him £125 for it, intending to fit it when I installed the pair of lightweight polycarb windows that I've just ordered, but because these are fixed solid,with sliding vents, I'm making some brkts. to secure them and the inner part of the seal will not fit with them, so I'm going to use a different seal arrangement.
Hence reason for selling, the seal has never been fitted, and in overall very good condition, however there is a small amount of corrosion at one end with another 2 small bumps evident, due to damp when in storage, poor manufacturing quality I guess, but it's in far better condition than those on older cars out there.
I've tried to show the faults as best as i can in the pics.
The price from DeRoure for a new seal is £328 + carriage!
Woodford lightweight trailer
Perfect for an Elise and easy to move around. I’ll confirm bed size if needed. Excellent condition albeit not as shiny as in pics taken last year. This one has the centre deck, tyre rack and jerry can box. Bargain as i have a covered trailer coming. It has just been serviced at WTA in Exeter so ready for the season. Thanks
LOTUS Rear badge letters
Lotus rear badge letters, not genuine, very close to original size at 17mm high, although slightly different shape, new still in sealed bags.
I bought them from someone on the forum a while ago, in case I needed to replace the set I had on my car when it was having its wrap redone recently.
I'd bought a set for my car back in 2014 as the original letters hadn't been replaced when it had been wrapped with the 'Gulf' orange and black pinstripes over its fresh blue paint.
At the time I paid more than enough for them; but as it turned out the graphics guys redoing my car are perfectionists, using lazers to get everything perfectly in line, and they cleaned my original T and refitted without any hassle.