K Series S2 original lower engine mount, good condition, rubber bush okay not perished, replaced with adjustable one when I bought my car in 2014.
Delivery applies to U/K only.
Check out our featured listings
K Series S2 original lower engine mount, good condition, rubber bush okay not perished, replaced with adjustable one when I bought my car in 2014.
Delivery applies to U/K only.
Do you have an Exige V6 CUP or 430 CUP or maybe an Elise 250 CUP. This registration number is for you. The registration is on a retention certificate and ready for transfer. The £80 transfer fee is included.
Silver filler cap surround, which I replaced with a black one not long after I bought my car in 2014 (although car is an '02) really good condition, no corrosion or scratches, anodizing not faded. Less than half price of a new one from Lotus!
Delivery is for U/K only as it ends up being a lot of hassle otherwise!
Ecliptech Shift P2 with steering wheel mount fixture.
I made the steering wheel mount to locate between the wheel and the hub, the carbon plate is machined to fit the stock wheel mounting holes of 5mm on 70mm P.C.D.
The unit is new and unused, apart from being connected to test functions, I was intending to only use it as a shift light, hence you'll see the plug & socket I have it wired to only having 3 pins, however I've included a 6 pin plug & socket so that the additional functions of the unit can be utilised if so desired.
My reason for selling it is that I've now replaced my original Stack Unit (also for sale here) with a digital dash unit that has a shift light incorporated.
Numerous hours went into making the assembly, as you can imagine, and I've left it with the 6 wires of the unit coiled up inside the ally mount but not connected, so that you can use your own colour coding.
The price is less than I paid for the Ecliptech u…
Once fitted, these allow use of lift point C for jacking or supporting the car without having to remove the undertray; and if used with a 2 post lift, prevent any chance of the car toppling over backwards when removing the front wheels having used lift point A instead.
They are the correct size to match the crossmember, anything larger resulting in them not being flush with the sides of the chassis, as it tapers forward from the mounting point.
To fit them you simply remove the undertray, undo the outer crossmember bolt nearest the sill, and fit in place using the supplied replacement longer bolt, with the 'larger' side of the puck pointing inwards towards the centre of the car, so that the support is between the bolts.
They will fit all models/variants of the S1, S2 & S3 Elise/Exige also the VX220 & Europa.
Now includes a pair of good quality 'Jack Point' stickers for marking the undertray, courtesy of 'Divine Handcraft'
I've gene…
4 off handbrake cable clips for retaining cables to gearbox, good condition, fitted new ones recently during my cars rebuild, whilst they were still available, E.P. having them in stock at the time, but I think now on long term factory back order.
These might get you out of trouble if one of yours has broken, or maybe got lost somewhere in your workshop as it made a bid for freedom when you were replacing a cable!
Make me an offer for them? They're obviously not worth much unless you need a replacement!
Hangar 111 'Signature' Exhaust Tailbox, I bought this from someone on the forum who'd had it on his car for a fortnight, then since removed it, as he lived in a quiet cul-de-sac and had received various complaints from long standing neighbours about how loud it was first thing in the morning, and had swapped back to his original to keep the peace!
I bought it and fitted it in place of the Larini exhaust that my car came with, as part of the upgrade when my car was being rebuilt earlier this year, along with a 4 branch downpipe and sports cat, however, when the cars' new engine was being tested on the Dyno, back in November 2013, I was told that it was restricting max power by quite a lot, so I've now replaced it with one of Elise Parts big bore tailboxes., which are 2 1/2'' bore as opposed to this being 1 3/4''
It's in near perfect condition having only been on my car during 'running in' the new engine on the dyno, with no road use at all, apart from the couple…
Pair of satin black window winders, very recently bought from Elise Parts, only trial fitted to my car.
They are really well made, with nicely rounded corners, far better than the stock Lotus ones!
The reason why I'm selling them is that I'm about to fit some polycarbonate windows which are fixed rigid in the doors, with sliding vents to let the air in, so I no longer need a winding handle!
Along with them I'll include 8 off titanium screws in rainbow colour, which I bought to replace the stock stainless ones they come fitted with (pic to follow) I've also got a set of black titanium screws as an alternative set if you prefer. The titanium screws cost £4.68 each so I won't let both sets go with them!
They will fit all models S1/S2/S3 Elise & Exige, 2-11, also the Europa, & VX220
Elise S2/S3, (poss. fit others?) shower cap, bought several years ago and only used a couple of times, as I had a really heavy duty one I used to keep at work for when I parked it up there.
Velcro straps secure front end around mirrors, with plastic clips to engage in rear roof location points.
Stored this in the boot to take to race meetings and shows, but only needed occasional use, no rips or tares and not affected by U/V from sunshine!
Nice waterproof canvas backed material, only taken out of bag since I last used it, for pics today.
Transform the gearchange on your k series Elise s1 and s2 with these precision made nylatron gear linkage bushes.
These replace your worn rubber bushes on the cable ends of the gear linkage and the plastic bushes on the bell crank pivot.
When fitted these will give a much more positive feel to the gear change
Easy DIY fitting guide included
£17.95 posted