A pair of S1 headlights in good condition for 25 years old ,plus postage

CNC machined solid ally stalks for Elise Exige S1 S2 S3

(see attached image of the OEM stalks these will replace )

fitting instruction included

Available in a range of finish options:

A Satin black with brushed tips

B Satin black

C Brushed ally

D High polished

NOTE will not fit anything with cruise control Price includes UK postage happy to post world wide at cost

Transform the gearchange on your k series Elise s1 and s2 with these precision made nylatron gear linkage bushes.

These replace your worn rubber bushes on the cable ends of the gear linkage and the plastic bushes on the bell crank pivot.

When fitted these will give a much more positive feel to the gear change

Easy DIY fitting guide included

£17.95 posted

K Series S2 original lower engine mount, good condition, rubber bush okay not perished, replaced with adjustable one when I bought my car in 2014.

Delivery applies to U/K only.

Perfect for an Elise and easy to move around. I’ll confirm bed size if needed. Excellent condition albeit not as shiny as in pics taken last year. This one has the centre deck, tyre rack and jerry can box. Bargain as i have a covered trailer coming. It has just been serviced at WTA in Exeter so ready for the season. Thanks

Matching Compomotive MO wheels in 16” and 17” wheels, which I believe to be pretty rare. These were previously fitted to an S1 Elise and looked great, having similar offsets to the Victory 160 wheels but an inch bigger.

Front wheels are: ET 10 7J x16 205/45/R16

Rear wheels are: ET 5 8j x 17 225/45/R17

Tyres are AD08R and all have at least 5-6mm left on them, although age unknown.

Can arrange postage for £50 or collection from Dumbarton.

Revotec adjustable rad. fan controller, temp. range 70 to 120 deg. complete with silicon top hose, stainless hose clips and E.P. fitting instructions.

I bought this for my S2 K Series as I wanted the fan to cut in before the temp got to 105 deg. which I considered to be on the high side. It was installed in a new rad hose on the offside of the car, which I've included with it, although it will fit any 32mm hose in a different place if preferred.

I ran it on the car for a few months prior to installing a Davies Craig E.W.P. it's in perfect working condition, unearthed recently during workshop tidying, at which point I discovered the relay mounting 'tag' had cracked, so I've repaired it as you'll see in the pic. with an ally. one.

This will fit the S1 and S2 Elise and Exige, and the 340R Delivery applies to U/K only as it's become too much hassle sending stuff abroad now!

Ecliptech Shift P2 with steering wheel mount fixture.

I made the steering wheel mount to locate between the wheel and the hub, so that the unit sits just over the top of the wheel, the carbon plate is machined to fit the stock wheel mounting holes of 5mm on 70mm P.C.D.

It looks excellent when fitted, far better than the intended  posn. where you're supposed to be using your peripheral vision, and you can just glance down, rather than having to look away from the road ahead!

The unit is new and unused, apart from being connected to test functions, I was intending to only use it as a shift light, hence you'll see the plug & socket I have it wired to only having 3 pins, however I've included a 6 pin plug & socket so that the additional functions of the unit can be utilised if so desired.

My reason for selling it is that I've now replaced my original Stack Unit (also for sale here) with a digital dash unit that has a shift light incorporated.<…

Elise S2 onwards door waist seal, Lotus part no. B1117U0009F  I bought this earlier this week from 'VirgilTracey' who had advertised it here for 'offers' and I paid him £125 for it, intending to fit it when I installed the pair of lightweight polycarb windows that I've just ordered, but because these are fixed solid,with sliding vents, I'm making some brkts. to secure them and the inner part of the  seal will not fit with them, so I'm going to use a different seal arrangement.

Hence reason for selling, the seal has never been fitted, and in overall very good condition, however there is a small amount of corrosion at one end with another 2 small bumps evident, due to damp when in storage, poor manufacturing quality I guess, but it's in far better condition than those on older cars out there.

I've tried to show the faults as best as i can in the pics.

The price from DeRoure for a new seal is £328 + carriage!

Lotus rear badge letters, not genuine, very close to original size at 17mm high, although slightly different shape, new still in sealed bags.

I bought them from someone on the forum a while ago, in case I needed to replace the set I had on my car when it was having its wrap redone recently.

I'd bought a set for my car back in 2014 as the original letters hadn't been replaced when it had been wrapped with the 'Gulf' orange and black pinstripes over its fresh blue paint.

At the time I paid more than enough for them; but as it turned out the graphics guys redoing my car are perfectionists, using lazers to get everything perfectly in line, and they cleaned my original T and refitted without any hassle.