Do you have an Exige V6 CUP or 430 CUP or maybe an Elise 250 CUP. This registration number is for you. The registration is on a retention certificate and ready for transfer. The £80 transfer fee is included.
Featured Listings
Check out our featured listings
Elise Shower Cap
Elise S2/S3, (poss. fit others?) shower cap, bought several years ago and only used a couple of times, as I had a really heavy duty one I used to keep at work for when I parked it up there.
Velcro straps secure front end around mirrors, with plastic clips to engage in rear roof location points.
Stored this in the boot to take to race meetings and shows, but only needed occasional use, no rips or tares and not affected by U/V from sunshine!
Nice waterproof canvas backed material, only taken out of bag since I last used it, for pics today.
Nylatron gear linkage bush kit for all k series Elise Exige models
Transform the gearchange on your k series Elise s1 and s2 with these precision made nylatron gear linkage bushes.
These replace your worn rubber bushes on the cable ends of the gear linkage and the plastic bushes on the bell crank pivot.
When fitted these will give a much more positive feel to the gear change
Easy DIY fitting guide included
£17.95 posted
Gearbox handbrake cable clips
4 off handbrake cable clips for retaining cables to gearbox, good condition, fitted new ones recently during my cars rebuild, whilst they were still available, E.P. having them in stock at the time, but I think now on long term factory back order.
These might get you out of trouble if one of yours has broken, or maybe got lost somewhere in your workshop as it made a bid for freedom when you were replacing a cable!
Make me an offer for them? They're obviously not worth much unless you need a replacement!
LOTUS Rear badge letters
Lotus rear badge letters, not genuine, very close to original size at 17mm high, although slightly different shape, new still in sealed bags.
I bought them from someone on the forum a while ago, in case I needed to replace the set I had on my car when it was having its wrap redone recently.
I'd bought a set for my car back in 2014 as the original letters hadn't been replaced when it had been wrapped with the 'Gulf' orange and black pinstripes over its fresh blue paint.
At the time I paid more than enough for them; but as it turned out the graphics guys redoing my car are perfectionists, using lazers to get everything perfectly in line, and they cleaned my original T and refitted without any hassle.
Lotus Elise S3 1.6 Touring, 2010, Yellow, 41k miles, 4 previous owners.
Full black leather interior trim with yellow detail stitching, Probax seats.
Extra equipment includes, hard and soft tops, Bilstein Sport suspension, 2Bular Stainless exhaust system (4 branch manifold, cat and silencer), K&N air filter.
The car is in great condition inside and out and benefits from a recent Alloy radiator (Seriously Lotus) replacement.
This has been my second Elise and much preferred to my S2. I'm now in my 70's and have totally enjoyed my last 4 1/2 years of ownership but have now decided that it's perhaps time for someone else to put a few more miles on the clock!
Any questions, more than happy to chat.
Woodford lightweight trailer
Perfect for an Elise and easy to move around. I’ll confirm bed size if needed. Excellent condition albeit not as shiny as in pics taken last year. This one has the centre deck, tyre rack and jerry can box. Bargain as i have a covered trailer coming. It has just been serviced at WTA in Exeter so ready for the season. Thanks
Hangar 111 Tailbox
Hangar 111 'Signature' Exhaust Tailbox, I bought this from someone on the forum who'd had it on his car for a fortnight, then since removed it, as he lived in a quiet cul-de-sac and had received various complaints from long standing neighbours about how loud it was first thing in the morning, and had swapped back to his original to keep the peace!
I bought it and fitted it in place of the Larini exhaust that my car came with, as part of the upgrade when my car was being rebuilt earlier this year, along with a 4 branch downpipe and sports cat, however, when the cars' new engine was being tested on the Dyno, back in November 2013, I was told that it was restricting max power by quite a lot, so I've now replaced it with one of Elise Parts big bore tailboxes., which are 2 1/2'' bore as opposed to this being 1 3/4''
It's in near perfect condition having only been on my car during 'running in' the new engine on the dyno, with no road use at all, apart from the couple…
Revotec Rad. Fan Controller
Revotec adjustable rad. fan controller, temp. range 70 to 120 deg. complete with silicon top hose, stainless hose clips and E.P. fitting instructions.
I bought this for my S2 K Series as I wanted the fan to cut in before the temp got to 105 deg. which I considered to be on the high side. It was installed in a new rad hose on the offside of the car, which I've included with it, although it will fit any 32mm hose in a different place if preferred.
I ran it on the car for a few months prior to installing a Davies Craig E.W.P. it's in perfect working condition, unearthed recently during workshop tidying, at which point I discovered the relay mounting 'tag' had cracked, so I've repaired it as you'll see in the pic. with an ally. one.
This will fit the S1 and S2 Elise and Exige, and the 340R Delivery applies to U/K only as it's become too much hassle sending stuff abroad now!
Satin Black Window Winders
Pair of satin black window winders, very recently bought from Elise Parts, only trial fitted to my car.
They are really well made, with nicely rounded corners, far better than the stock Lotus ones!
The reason why I'm selling them is that I'm about to fit some polycarbonate windows which are fixed rigid in the doors, with sliding vents to let the air in, so I no longer need a winding handle!
Along with them I'll include 8 off titanium screws in rainbow colour, which I bought to replace the stock stainless ones they come fitted with (pic to follow) I've also got a set of black titanium screws as an alternative set if you prefer. The titanium screws cost £4.68 each so I won't let both sets go with them!
They will fit all models S1/S2/S3 Elise & Exige, 2-11, also the Europa, & VX220