K Series S2 original lower engine mount, good condition, rubber bush okay not perished, replaced with adjustable one when I bought my car in 2014.
Delivery applies to U/K only.
Check out our featured listings
K Series S2 original lower engine mount, good condition, rubber bush okay not perished, replaced with adjustable one when I bought my car in 2014.
Delivery applies to U/K only.
Engine hatch cover from my 2002 Elise, was originally black when new, but subsequently resprayed blue 6 months before I bought the car in 2014, the orange centre band and black pin stripes are wraps, so could be removed with careful use of a heat gun or very hot hairdryer. I've included a couple of pics of my car just back from the graphics guys, if you zoom in you can see there's no damage to the paint underneath.
It's in perfect condition with no damage to the plastic louvres either.
Reason for sale is that I've replaced it with a carbon fibre one, all part of my cars extensive rebuild!
I'll accept a sensible offer, but I won't give it away!
Ideally needs collecting due to its size and fragility, but I could try and arrange a courier if needs be. U/K delivery only.
Once fitted, these allow use of lift point C for jacking or supporting the car without having to remove the undertray; and if used with a 2 post lift, prevent any chance of the car toppling over backwards when removing the front wheels having used lift point A instead.
They are the correct size to match the crossmember, anything larger resulting in them not being flush with the sides of the chassis, as it tapers forward from the mounting point.
To fit them you simply remove the undertray, undo the outer crossmember bolt nearest the sill, and fit in place using the supplied replacement longer bolt, with the 'larger' side of the puck pointing inwards towards the centre of the car, so that the support is between the bolts.
They will fit all models/variants of the S1, S2 & S3 Elise/Exige also the VX220 & Europa.
Now includes a pair of good quality 'Jack Point' stickers for marking the undertray, courtesy of 'Divine Handcraft'
I've gene…
Full black leather interior trim with yellow detail stitching, Probax seats.
Extra equipment includes, hard and soft tops, Bilstein Sport suspension, 2Bular Stainless exhaust system (4 branch manifold, cat and silencer), K&N air filter.
The car is in great condition inside and out and benefits from a recent Alloy radiator (Seriously Lotus) replacement.
This has been my second Elise and much preferred to my S2. I'm now in my 70's and have totally enjoyed my last 4 1/2 years of ownership but have now decided that it's perhaps time for someone else to put a few more miles on the clock!
Any questions, more than happy to chat.
Perfect for an Elise and easy to move around. I’ll confirm bed size if needed. Excellent condition albeit not as shiny as in pics taken last year. This one has the centre deck, tyre rack and jerry can box. Bargain as i have a covered trailer coming. It has just been serviced at WTA in Exeter so ready for the season. Thanks
A change of plans means I have these Exige lightweight size twin spoke forged wheels (the slightly wider fronts that really suit Elise too). S2 of course. They are as new and only test fitted with unused Rainsport tyres currently fitted. I was going to use these as spares for wet days! Included is s barely used set of Toyo R888R (just one day of hillclimb at Prescott). These are the 205-45-16 fronts which work particularly well on these rims and were purchased in April last year so are lovely and soft.. Id prefer to sell as s complete package but could be persuaded to split. The two sets of tyres would be well over 1k so grab a bargain.
4 off handbrake cable clips for retaining cables to gearbox, good condition, fitted new ones recently during my cars rebuild, whilst they were still available, E.P. having them in stock at the time, but I think now on long term factory back order.
These might get you out of trouble if one of yours has broken, or maybe got lost somewhere in your workshop as it made a bid for freedom when you were replacing a cable!
Make me an offer for them? They're obviously not worth much unless you need a replacement!
Ecliptech Shift P2 with steering wheel mount fixture.
I made the steering wheel mount to locate between the wheel and the hub, the carbon plate is machined to fit the stock wheel mounting holes of 5mm on 70mm P.C.D.
The unit is new and unused, apart from being connected to test functions, I was intending to only use it as a shift light, hence you'll see the plug & socket I have it wired to only having 3 pins, however I've included a 6 pin plug & socket so that the additional functions of the unit can be utilised if so desired.
My reason for selling it is that I've now replaced my original Stack Unit (also for sale here) with a digital dash unit that has a shift light incorporated.
Numerous hours went into making the assembly, as you can imagine, and I've left it with the 6 wires of the unit coiled up inside the ally mount but not connected, so that you can use your own colour coding.
The price is less than I paid for the Ecliptech u…
Elise S2/S3, (poss. fit others?) shower cap, bought several years ago and only used a couple of times, as I had a really heavy duty one I used to keep at work for when I parked it up there.
Velcro straps secure front end around mirrors, with plastic clips to engage in rear roof location points.
Stored this in the boot to take to race meetings and shows, but only needed occasional use, no rips or tares and not affected by U/V from sunshine!
Nice waterproof canvas backed material, only taken out of bag since I last used it, for pics today.
Lotus rear badge letters, not genuine, very close to original size at 17mm high, although slightly different shape, new still in sealed bags.
I bought them from someone on the forum a while ago, in case I needed to replace the set I had on my car when it was having its wrap redone recently.
I'd bought a set for my car back in 2014 as the original letters hadn't been replaced when it had been wrapped with the 'Gulf' orange and black pinstripes over its fresh blue paint.
At the time I paid more than enough for them; but as it turned out the graphics guys redoing my car are perfectionists, using lazers to get everything perfectly in line, and they cleaned my original T and refitted without any hassle.