K Series S2 original lower engine mount, good condition, rubber bush okay not perished, replaced with adjustable one when I bought my car in 2014.
Delivery applies to U/K only.
Check out our featured listings
K Series S2 original lower engine mount, good condition, rubber bush okay not perished, replaced with adjustable one when I bought my car in 2014.
Delivery applies to U/K only.
Elise S2 onwards door waist seal, Lotus part no. B1117U0009F I bought this earlier this week from 'VirgilTracey' who had advertised it here for 'offers' and I paid him £125 for it, intending to fit it when I installed the pair of lightweight polycarb windows that I've just ordered, but because these are fixed solid,with sliding vents, I'm making some brkts. to secure them and the inner part of the seal will not fit with them, so I'm going to use a different seal arrangement.
Hence reason for selling, the seal has never been fitted, and in overall very good condition, however there is a small amount of corrosion at one end with another 2 small bumps evident, due to damp when in storage, poor manufacturing quality I guess, but it's in far better condition than those on older cars out there.
I've tried to show the faults as best as i can in the pics.
The price from DeRoure for a new seal is £328 + carriage!
Silver filler cap surround, which I replaced with a black one not long after I bought my car in 2014 (although car is an '02) really good condition, no corrosion or scratches, anodizing not faded. Less than half price of a new one from Lotus!
Delivery is for U/K only as it ends up being a lot of hassle otherwise!
Revotec adjustable rad. fan controller, temp. range 70 to 120 deg. complete with silicon top hose, stainless hose clips and E.P. fitting instructions.
I bought this for my S2 K Series as I wanted the fan to cut in before the temp got to 105 deg. which I considered to be on the high side. It was installed in a new rad hose on the offside of the car, which I've included with it, although it will fit any 32mm hose in a different place if preferred.
I ran it on the car for a few months prior to installing a Davies Craig E.W.P. it's in perfect working condition, unearthed recently during workshop tidying, at which point I discovered the relay mounting 'tag' had cracked, so I've repaired it as you'll see in the pic. with an ally. one.
This will fit the S1 and S2 Elise and Exige, and the 340R Delivery applies to U/K only as it's become too much hassle sending stuff abroad now!
Do you have an Exige V6 CUP or 430 CUP or maybe an Elise 250 CUP. This registration number is for you. The registration is on a retention certificate and ready for transfer. The £80 transfer fee is included.
Ecliptech Shift P2 with steering wheel mount fixture.
I made the steering wheel mount to locate between the wheel and the hub, the carbon plate is machined to fit the stock wheel mounting holes of 5mm on 70mm P.C.D.
The unit is new and unused, apart from being connected to test functions, I was intending to only use it as a shift light, hence you'll see the plug & socket I have it wired to only having 3 pins, however I've included a 6 pin plug & socket so that the additional functions of the unit can be utilised if so desired.
My reason for selling it is that I've now replaced my original Stack Unit (also for sale here) with a digital dash unit that has a shift light incorporated.
Numerous hours went into making the assembly, as you can imagine, and I've left it with the 6 wires of the unit coiled up inside the ally mount but not connected, so that you can use your own colour coding.
The price is less than I paid for the Ecliptech u…
Transform the gearchange on your k series Elise s1 and s2 with these precision made nylatron gear linkage bushes.
These replace your worn rubber bushes on the cable ends of the gear linkage and the plastic bushes on the bell crank pivot.
When fitted these will give a much more positive feel to the gear change
Easy DIY fitting guide included
£17.95 posted
CNC machined solid ally stalks for Elise Exige S1 S2 S3
(see attached image of the OEM stalks these will replace )
fitting instruction included
Available in a range of finish options:
A Satin black with brushed tips
B Satin black
C Brushed ally
D High polished
NOTE will not fit anything with cruise control Price includes UK postage happy to post world wide at cost
Engine hatch cover from my 2002 Elise, was originally black when new, but subsequently resprayed blue 6 months before I bought the car in 2014, the orange centre band and black pin stripes are wraps, so could be removed with careful use of a heat gun or very hot hairdryer. I've included a couple of pics of my car just back from the graphics guys, if you zoom in you can see there's no damage to the paint underneath.
It's in perfect condition with no damage to the plastic louvres either.
Reason for sale is that I've replaced it with a carbon fibre one, all part of my cars extensive rebuild!
I'll accept a sensible offer, but I won't give it away!
Ideally needs collecting due to its size and fragility, but I could try and arrange a courier if needs be. U/K delivery only.
Full black leather interior trim with yellow detail stitching, Probax seats.
Extra equipment includes, hard and soft tops, Bilstein Sport suspension, 2Bular Stainless exhaust system (4 branch manifold, cat and silencer), K&N air filter.
The car is in great condition inside and out and benefits from a recent Alloy radiator (Seriously Lotus) replacement.
This has been my second Elise and much preferred to my S2. I'm now in my 70's and have totally enjoyed my last 4 1/2 years of ownership but have now decided that it's perhaps time for someone else to put a few more miles on the clock!
Any questions, more than happy to chat.